MCA 225 Gen2
THB
109000

MCA 225 GEN 2 Specifications 

POWER OUTPUT (PER CHANNEL)
(Continuous RMS, 20 Hz - 20 kHz, <1% THD)


Impedance

8Ω 225 W

4Ω 400 W

2Ω 600 W



INPUTS / OUTPUTS

Inputs

Single-Ended, Balanced, Relay Trigger (3.5-mm Mono Jack)

Outputs

Speaker Binding Posts, Relay Trigger (3.5-mm Mono Jack)

SWITCHES

Front Panel

Power (On/Off)

Rear Panel

3 On/Off Modes (Trigger, Manual, Auto)

THD at 100W

at 1 kHz

0.0010%

at 20 kHz

0.015%

IMD at 100 W

ITU-R (19 kHz + 20 kHz)

0.0005%

SMPTE (60 Hz + 7 kHz)

0.002%

Frequency Response, 20 Hz to 20 kHz

open circuit

± 0.1 dB

± 0.1 dB

± 0.1 dB

± 0.2 dB

OTHER SPECIFICATIONS

SNR, IEC-A, ref. 225 W

120 dB

Power Bandwidth, -3 dB at 200 W into 8 ohms

90 kHz

Slew Rate

30 V/μs

Damping Factor, 20 Hz to 1 kHz 

300

Channel Separation, 100 Hz to 10 kHz

>65 dB

Input Impedance (RCA / XLR)

10 kΩ / 15 kΩ

Input Sensitivity, 225 W into 8 Ω

1.5 Vrms

Voltage Gain

29 dB

POWER CONSUMPTION 

standby

idle

typical

high output

MCA 525 (Gen. 2)

2.0 W

80 W

550 W

1200 W

MCA 325 (Gen. 2)

1.4 W

47 W

350 W

750 W

MCA 225 (Gen. 2)

1.0 W

35 W

240 W

500 W

DIMENSIONS

Height

6-5/8” (16.9 cm)

Height with Rackmount Kit

4U

Width

17-1/4" (43.9 cm)

Depth

18-1/8" (46 cm)

WEIGHT

MCA 525 (Gen. 2)

61 lb (27.5 kg)

MCA 325 (Gen. 2)

43 lb (19.5 kg)

MCA 225 (Gen. 2)

40 lb (18 kg)

POWER REQUIREMENT

120 V version:

In countries where the line voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz.

220-240 V version:

In countries where the line voltage is 220, 230, or 240 V, this product operates from a single phase AC power source that supplies between 198 V and 264 V at a frequency of 50 Hz.

In stock ready to ship
Out of stock
Distributor
No items found.