Product Specifications

‍

   Turntable Section:

   Drive System:

   Belt Drive

   Motor:

   DC Motor

   Selectable Speeds:

   33-1/3 and 45 RPM

   Motor Servo:

   Speed Rotation and Servo System

   Rotation Speed Variation:

   +/- 1%

   Wow and Flutter:

   0.1%

   Signal-To-Noise Ratio:

   -67 dB or higher (A-weighted) -60dB or higher (unweighted)

   Platter:

   Aluminum die-cast

   Platter Diameter:

   0 in / 300 mm

   Tonearm Section:

   Type:

   Aluminum tube, static-balanced

   Effective Arm Length:

   8in / 223.6 mm

   Stylus Pressure Range:

   0 to 4 g

   Cartridge Weight Range:

   3.5 to 6g

   Effective Arm Mass:

   27.4 g

   Overhang:

   18.6 mm

   Offset Angle:

   25 degrees

   Anti-Skating:

   Adjustment Supported

   Main Bearing:

   Stainless steel

   Cartridge Section:

   Type:

   Audio-Technica AT91 moving magnet

   Stylus Construction:

   Bonded diamond

   Mount:

   Half-inch

   Frequency Response:

   20 Hz to 20 kHz

   Channel Separation:

   >18 dB

   Channel Balance:

   2.5 dB

   Vertical Tracking:

   Angle 20 degrees

   Stylus Pressure:

   2.0 g +/-0.5 g

   Cartridge Weight:

   5.0 g +/-0.5 g

   Stylus Pressure:

   2.0 g +/-0.5 g

   Headshell Weight:

   0 g (including screws, nuts and wires)

   Phono Equalizer Amplifier:

   Type:

   Moving magnet (MM)

   Phono Output:

   2.5 mV (1 kHz, 3.54 cm/sec)

   Line Output:

   140 mV (-17 dBV)

   Phono/Line:

   Switchable

   Supported Load Impedance:

   47 kΩ

   General:

   Connector:

   RCA pin jack including RCA cable accessories

   Voltage:

   100 to 240 V AC / 50 to 60 Hz

   Power Consumption:

   1.5 W (less than 0.5 W at standby)

   Dimensions:

   (WXHXD) 5.5 x 16.05 x 14.20

   Weight:

   12.10 lb

‍